Site assessment
We review risk, clearances, traffic, services and access requirements.

02 · Gates
Trackless automated gates built for reliable operation across sloped, uneven and high-traffic entries.
Designed around your operation

Every RJL solution is planned around traffic flow, security risk, safety obligations, power availability and the way your people use the site every day.
RJL project delivery
We review risk, clearances, traffic, services and access requirements.
Our team engineers the right system and fabricates custom components.
Installation, automation, safety setup and operational handover.
Planned maintenance, rapid response and nationwide portfolio support.
Detailed capability
Buyer's guide
A cantilever gate slides like a sliding gate but has no ground track. It hangs from heavy roller carriages on posts beside the opening, and a tail behind the gate balances the weight, so the opening stays completely clear.
It costs more than a standard sliding gate and needs more side room for the tail, but it removes the most common sliding gate failure: a dirty or damaged track.
Ratings are the manufacturer's published maximums for a well-built gate on level ground. RJL picks a motor with headroom after checking gate weight, wind load, slope and how many times a day the gate runs. Ranges change, so we confirm the current model when we quote.
| Gate style or site | Example models | Why it suits |
|---|---|---|
| Cantilever gate up to about 600kg (light commercial, pedestrian-heavy sites) | Centurion D6 SMART (600kg) · BFT Deimos BT A600 (600kg) · Roger Technology BH30/604/HS (600kg) | Enough for a short cantilever leaf. 24V with battery backup. |
| Cantilever gate about 800–1000kg (most commercial and industrial entries) | Centurion D10 SMART (1000kg) · CAME BXV (up to 1000kg) · Roger Technology BH30/804 (800kg) · DEA Rev (1000kg) | A cantilever leaf is longer and heavier than the opening because of its tail, so we size up a step. |
| Long or heavy cantilever gate, 1500–2000kg (logistics, depots, wide truck entries) | CAME BKV20 (2000kg) · BFT Icaro Ultra AC A2000 (2000kg) · Roger Technology BG30/1804/HS (1800kg) | High torque and encoder speed control to start and stop a heavy leaf smoothly. |
| Off-grid, temporary or solar cantilever gate | Centurion D6 SMART / D10 SMART on solar charge · other 24V DC operators with battery packs | No mains power needed. Suits job sites, rural sites and remote compounds. |
| Need | Example products | What it does |
|---|---|---|
| Vehicle detection without cutting the road | Optex OVS-01GT vehicle presence sensor | Mounted above ground. Uses microwave and ultrasonic sensing to detect a stopped vehicle within 5.5m, so it can replace an in-ground loop. Works day and night. |
| Number plate recognition (ANPR) at gates and booms | Hikvision DS-TCG406-E (4MP access ANPR camera) · Dahua ITC413-PW4D series (access ANPR camera) | Reads plates as the car arrives and opens for approved vehicles. No cards or remotes needed. |
| Safety beams, anti-tailgating and gate safety | Optex safety and detection sensors · photocells and safety edges matched to the operator | Stops the gate or boom closing on a person or vehicle and helps catch tailgaters. |




Plan for about one and a half times the opening. A 6m opening usually needs about 9m of straight fence line for the gate and its tail.
Yes, they usually cost more than a tracked sliding gate of the same width, because of the extra steel, carriages and footings. Lower maintenance often makes up some or all of the difference over the life of the gate.
Yes. A 24V operator such as the Centurion D10 SMART can run from batteries charged by solar, which suits remote and temporary sites.
Start a conversation
Talk to RJL about your project, maintenance portfolio or urgent access requirements.
Request a site assessment